This is a three-time controller into the evening working time,an interval of rest of pause time,Dawn working time(morning light function), the user can according to their needs,set a different time
OEM LCD Display 20A MPPT 12V/24V Solar Panel Battery Regulator Charge Controller without Any Logo On Surface T20 LCD Wholesales is a one of our OEM LCD Display 20A MPPT 12V 24V Solar Panel Battery Reg Tools, you can buy OEM LCD Display 20A MPPT 12V/24V Solar Panel Battery Regulator Charge Controller without Any Logo On Surface T20 LCD Wholesales from ukobd2.com.
Wholesale Top quality VAS6154, GM Tech2, VCM II For Ford, Handy Baby II Car Key Chip Copier, CDP DS150
T10,T20 10A 20A Solar Charge Controller Dual timer
This is a three-time controller into the evening working time,an interval of rest of pause time,Dawn working time(morning light function), the user can according to their needs,set a different time
Package including:
1.1PCS 20A Solar Contorller T20
2.1PCS User Manual
3. Temperature Sensor
Only One Screen to show all the charging information. |
|
|
A:time(evening working) B:time(pause working) C:time(dawn working)
This is a compatible MPPT charge controller PWM intelligent / efficient / energy saving, he not only has efficient MPPT controller charging function to automatically track the maximum power point, 10% -30% higher than the ordinary controller charging efficiency, also has standby energy saving, more than 30% energy than ordinary controller, the standby power consumption of only 10mA-15mA.
Product introduction
LCD screen display | Battery reverse discharge protection |
Easy operation interface | Battery reverse polarity protection |
MPPT+ PWM charging mode | Battery under voltage protection |
Parameter user can reset Overload | Short-circuit protection |
A key to restore the factory settings | USB 5V charging (for 500mA) for mobile phone(Only for T30) |
A key to open and close the load | Automatic temperature compensation function |
Dual Timer function
Data Sheet:
Parameters / Model | T10 | T20 | T30 | T40 |
Maximum power current | 12A | 20A | 30A | 40A |
Installation Lin mm2 | 4mm2 | 8mm2 | 10mm2 | 12mm2 |
Installation Line(AWG) | 10(AWG) | 8(AWG) | 7(AWG) | 6(AWG) |
Weight | 280g | 300g | 475g | 480 |
Dimensions | 143×89×46 mm | 187*97*61 mm | ||
System load loss | ≤13mA | |||
Loop Buck | ≤100mV |
Specification
Battery float voltage | 13.8V 12V system /27.6V 24V system |
Battery under voltage) protection | 10.6V 12V system /21.2V 24V system |
Battery (under voltage) recovery voltage | 12.6V 12V system /25.2V 24V system |
Charge mode | MPPT+PWM MODE |
Operating Temperature | -10~60°C |
Storage Temperature | -30~70°C |
Humidity requirements | ≤90%, No condensation |
Temperature compensation | -4mV/Cell/°C |
Temperature Probe (built components) | NTC 100K thermistats |
Maximum open circuit voltage of the solar panel | 18V-24V 12V system 36V-48V 24V system) |
Solar panels maximum open circuit voltage (V) | ≤48V |
(Cases) 12V system standard configuration
The peak voltage of the solar cell panel | 18V-25V | 18V-25V | 18V-25V | 18V-25V |
Peak power of solar cell panel | 50W-130W | 100W-260W | 200W-380W | ≤500W |
Model | T10 | T20 | T30 | T40 |
Battery standard voltage | 12V | 12V | 12V | 12V |
Battery capacity | ≥100AH | ≥200AH | ≥300AH | ≥400AH |
Installation Lin mm2 | 4mm2 | 8mm2 | 10mm2 | 12mm2 |
Installation Line(AWG) | 10(AWG) | 8(AWG) | 7(AWG) | 6(AWG) |