ECU open cover tool for KTAG
LED BDM Frame With 4 Probes Mesh with Open Cover/Shell Dismantling Assist ToolBDM Frame with Adapters Work for VVDI Multi Prog, KESS3,OBDSTAR DC706,etc.
Perfect Version LED BDM Frame With 4 Probes Mesh Plus 4PCS ECU PC Version Open Cover Tool For Kess K-TAG FoxFlash OBDSTAR DC706, Xhorse MultiProg is a one of our ECU open cover tool for KTAG Tools, you can buy Perfect Version LED BDM Frame With 4 Probes Mesh Plus 4PCS ECU PC Version Open Cover Tool For Kess K-TAG FoxFlash OBDSTAR DC706, Xhorse MultiProg from ukobd2.com.
Wholesale Top quality VAS6154, GM Tech2, VCM II For Ford, Handy Baby II Car Key Chip Copier, CDP DS150
images of Perfect Version LED BDM Frame With 4 Probes Mesh Plus 4PCS ECU PC Version Open Cover Tool For Kess K-TAG FoxFlash OBDSTAR DC706, Xhorse MultiProg
Perfect Version LED BDM Frame with 4 Probes Mesh for KESS, Dimsport, K-TAG, FoxFlash
The BDM FRAME with Adapters Set is crafted from high-quality stainless steel and is compatible with BDM100 programmers, KESS3, KTAG, FGTECH, CMD, OBDSTAR DC706, Xhorse Multi Prog, and more.
LED BDM Frame with Mesh and 4 Probe Pens
This frame is designed for use with FGTECH BDM100, KESS, KTAG, K-TAG, and other ECU programmer tools.
Important Tip:
No PCB is included in this package. The LED operates on 12V. After connecting the probe, disconnect the 12V battery to activate the LED. The probe pin is adjustable.
LED BDM Frame Description:
- Includes an acrylic board, mesh, and 4 probe pens.
- LED works on 12V. After connecting the probe, disconnect the 12V battery to activate the LED. The probe pin is adjustable.
- Ideal bracket for ECU updates, ECU brushing and writing, ECM modifications, programming, probe holding, and Dimsport aids.
- Compatible with KESS, KTAG, FGTECH, BDM100, KTM100, CMD, DIMSPORT AIDS, and other ECU chip tuning tools.
- Easy to use and offers improved performance over older BDM frames.
KTM100 KTAG ECU PC Version Open Cover Tool – 4pcs/Lot
ECU Open Tool for KESS, KTAG, FGTECH – Details:
These are useful tools for opening ECUs. By screwing the tools into place instead of using screws, the cover lifts uniformly—preventing folds or damage that can occur when using screwdrivers for leverage. For easier removal, it’s recommended to heat the lid to soften the silicone seal.
100% Brand New & High-Quality ECU Cover Extractor – Car Computer Removal Tool:
- Designed for easy removal and installation of car ECU computer covers.
- Works perfectly with ECU tuning tools such as KTAG, KESS, and FGTECH.
- Requires four or six tools simultaneously, depending on the ECU cover type.
- Must be installed in place of the original screws on the control unit to safely remove the cover without damage or deformation.
Package List:
- 1pc × BDM frame
- 1pc × BDM frame with LED (made with an acrylic board)
- 4pc × Cable for probe
- 4pc × Probe
- Note: No PCB board included in the package
- HQ stainless steel BDM frame for BDM Programmer / CMD 100
- 4pcs × KTM100 KTAG ECU PC Version Open Cover Tool