DY226 Battery Tester
DY226 can quickly, simply, accurately and reliably judge the no-load energy, the on-load condition, the internal resistance of the battery and the charging system conditions of 6V and 12V lead-acid accumulator.
Avaiable for electric vehicle battery, UPS battery, solar energy storage battery, automotive battery, marine battery.
DUOYI DY226 Battery Tester 6V 12V DC Quick Cranking Charging Circut Tester UPS Automotive Solar Energy Storage Marine Battery is a one of our DY226 Battery Tester Tools, you can buy DUOYI DY226 Battery Tester 6V 12V DC Quick Cranking Charging Circut Tester UPS Automotive Solar Energy Storage Marine Battery from ukobd2.com.
Wholesale Top quality VAS6154, GM Tech2, VCM II For Ford, Handy Baby II Car Key Chip Copier, CDP DS150
images of DUOYI DY226 Battery Tester 6V 12V DC Quick Cranking Charging Circut Tester UPS Automotive Solar Energy Storage Marine Battery
Battery load test
Display test result is 12.78V
The green light indicates that the battery is in good condition
PRODUCTION DETAILS
The no-load voltage can determine the battery level
The smaller the internal resistance of the same type of battery , the better the performance
Specification and Parameters
1. The instrument is applicable to common 6V and 12V lead-acid accumulators.
2. Load test current: about 80A.
3. Accumulator capacity detection range: 40Ah ~ 200Ah.
4. Maximum voltage: DC 19.99V.
5. Internal resistance range of battery: 1.00milliohm ~ 99.99 milliohm.
6. LED status indication:
Battery condition: "Green" (Sufficient Capacity), "Yellow"
(Insufficient Capacity), "Red" (Replace Battery);
Charging system: "Green" (Normal Charging), "Yellow" (Abnormal Charging).
7. Accumulator capacity presetting: continuously adjustable in the range of 40-200Ah, with 5Ah increment.
8. Test time: less than 10s; test time interval: it is suggested as about 5min.
9. Poor contact prompt for test clamp; reverse clamp connection protection; input over voltage protection.
10. Using condition: -10℃~ 55℃ , relative humidity: lower than 80%.
11. Product dimension: about 11.5*7.0*20.5cm; dead weight: about 900g.
NOTE: it can not test starting battery(CCA)
The test sampling data are directly sampled from the outgoing terminal of the battery in order to really recover the battery working condition in the battery working process and make the test result more accurate. 4-wires internal resistance test, 4 digits display for clear reading.
The shell of DY226 is made of solid ABS engineering materials, and the load heating simulation part is up and down installed with stainless steel porous plate, and the fan is configured to strengthen heat dissipation in order to make the test process more stable and more reliable. The test line part is composed of thick pure copper test wire, and is also configured with four-wire Kelvin test clamp for connection.
