AdblueOBD2 Emulator for IVECO

Ad-BlueOBD2 Emulator for IVECO Trucks1.Competitive price!2.Drive your truck without Diesel Exhaust Fluid!3.You can use this device, if you are unable to find a station to fuel up your ad-Blue/DEF tank.

Ad-BlueOBD2 Emulator for IVECO Trucks Override AD-Blue System Instantly is a one of our AdblueOBD2 Emulator for IVECO Tools, you can buy Ad-BlueOBD2 Emulator for IVECO Trucks Override AD-Blue System Instantly from ukobd2.com.

Wholesale Top quality VAS6154, GM Tech2, VCM II For Ford, Handy Baby II Car Key Chip Copier, CDP DS150

images of Ad-BlueOBD2 Emulator for IVECO Trucks Override AD-Blue System Instantly

Ad-BlueOBD2 Emulator for IVECO Trucks Override AD-Blue System InstantlyAd-BlueOBD2 Emulator for IVECO Trucks Override AD-Blue System InstantlyAd-BlueOBD2 Emulator for IVECO Trucks Override AD-Blue System InstantlyAd-BlueOBD2 Emulator for IVECO Trucks Override AD-Blue System InstantlyAd-BlueOBD2 Emulator for IVECO Trucks Override AD-Blue System InstantlyAd-BlueOBD2 Emulator for IVECO Trucks Override AD-Blue System Instantly

Ad-BlueOBD2 Emulator for IVECO Trucks

Ad-BlueOBD2 is a Plug&Drive Ready device to mulate working ad-Blue systems and NOx sensors on Trucks, which equipped with EURO 4/5/6 catalytic converter systems, even with damaged ad-Blue SCR system.dBlueOBD2 is easy to install.

Ad-Blue/DEF (Diesel Exhaust Fluid) is used to reduce NOx emissions in vehicles. We recommend you to use ad-Blue/DEF fuel. You can use this device, if you are unable to find a station to fuel up your ad-Blue/DEF tank.

Top 5 Reasons to Get Ad-blueOBD2 Emulator for MAN Trucks:

1. ad-BlueOBD2 is very easy to install. Just Plug it into OBD2 connector of truck or bus and remove the fuses mentioned.
2. ad-BlueOBD2 will override AD-Blue system instantly, it will stop the usage of ad-Blue liquid and disable Nox sensors.
3. Without any power loss of the engine or any warnings on the dashboard and in diagnostic system.
4. ad-BlueOBD2 does not damage the engine and not cause any negative effects to the truck factory setting.
5. ad-BlueOBD2 does not change any of the settings permanently. To turn back to the truck's original settings, just unplug ad-BlueOBD2 from OBD2 connector.

Installation and Calibration for IVECO Trucks:

1. Pull the Key out from the ignition.
2. Remove the following Fuses (IVECO)
Terminal - 5
Terminal - 15
3. Plug ad-BlueOBD2 into OBD2 connector
4. Turn on the ignition and check the level of ad-Blue, if it shows 50% or 70%.
5. If any fault light appears on dashboard, delete via service scanner.

Package including:

1pc x Ad-BlueOBD2 Emulator Box Interface


Go to Buy: Ad-BlueOBD2 Emulator for IVECO Trucks Override AD-Blue System Instantly

LONSDOR Key Programmer Porsche Piwis III GM Tech2 USB Link 2 CAN Clip wiTech MicroPod 2 T300 key programmer locksmith tools a b c d e f g h i j k l m n o p q r s t u v w x y z
Share to Pinterest