AUTEL DS808S TS
Autel MaxiDAS DS808S-TS, equipped with Full TPMS and Diagnostics, performs well both in your vehicle diagnosis and in Full TPMS. Autel DS808S-TS Scanner is upgraded from MP808S / MP808BT PRO which do not support TPMS functions, thus this scanner has complete TPMS services which same as MS906TS / MS906Pro-TS / MK906Pro-TS to solve the TPMS issues. If you want a scan tool to meet your diagnostic and TPMS need, then Autel DS808S-TS will be your best choice.
AUTEL MaxiDAS DS808S-TS Diagnostic Tool with Advanced ECU Coding & TPMS Services Upgraded of MP808S/ DS808TS is a one of our AUTEL DS808S TS Tools, you can buy AUTEL MaxiDAS DS808S-TS Diagnostic Tool with Advanced ECU Coding & TPMS Services Upgraded of MP808S/ DS808TS from ukobd2.com.
Wholesale Top quality VAS6154, GM Tech2, VCM II For Ford, Handy Baby II Car Key Chip Copier, CDP DS150
images of AUTEL MaxiDAS DS808S-TS Diagnostic Tool with Advanced ECU Coding & TPMS Services Upgraded of MP808S/ DS808TS
Together with the ability to quickly read and clear DTCs for all available modules of the majority of the makes and models on the market, MaxiDAS DS808S-TS provides superior special functions, including Oil Reset, EPB (Electronic Parking Brake), SAS (Steering Angle Sensor), and BMS (Battery Management System). In addition to OBDII diagnostics and special functions, DS808S-TS can perform comprehensive TPMS services with ease.
Autel MaxiDas DS808S-TS Highlights:
1. 99% of vehicles covered - Autel Scanner DS808S-TS is capable to diagnose almost all vehicles in the market, making it an one-for-all diagnostic scanner.
2. 1-Year Free Software Update -After 1 year, if you do not choose to continue to purchase the upgrade service, it will not affect the normal use of the device
3. A Key to Access On-board Systems - ABS, SRS, Engine, Transmission, Brake System, Emission System, Fuel system, Light system, Wiper System.. Autel Newest Diagnostic tool MaxiPro MP808TS can solve the vast majority of problems with your vehicle.
4. Wireless Diagnosis - Conducting wireless diagnostics through VCI module, Newest diagnostic tool MP808TS will set you free from entangled wires.
5. Compelete TPMS Services - Same as MS906TS/ MS906 PRO-TS/ MK906 PRO-TS. Combination of MS906 and hand held TS601 which is a solid and well respected TPMS tool. As Advanced TPMS diagnostics for complete TPMS health check. Autel DS808S-TS can activate sensors, retrieve data, clone and program Autel MX-Sensors and pinpoint faults on exclusive TPMS Status Screen.
6. Bi-Directional Control - DS808S-TS builds a mutual communication with onboard ECUs and execute every single one of your commands
7. 30+ Special Functions - Autel DS808S-TS Supports 30+ commonly used hot functions to meet the needs of daily maintenance diagnostic and reset.
8. Multi-Languages support
9. Same ECU Coding Functions as Autel MaxiSys MS906BT/ MS906 PRO/ MS906 PRO-TS/ MaxiCOM MK906 PRO/ MK906 PRO-TS/ MK908/ MK908 II
Product Features:
• Extensive vehicle coverage for more than 80 US, Asian and European vehicle makes and models
• Exceptional OE-level system coverage for all electronic systems
• Read and erase codes, View and Graph Live data, Perform bi-directional Active Tests, Perform Adaptations
• AutoVIN technology automatically identifies vehicle make, model, and year
• 7-inch LCD capacitive touchscreen with 1024 x 600 resolution display
• Powerful Cortex-A55 processor (1.8 GHz) processor
• 64GB on-board memory for better performance
• Android 11 operating system for fast boot-up and multitasking
• Wi-Fi-enabled automatic software and system updates
• Instant remote control tech support anytime, anywhere
• Advanced TPMS diagnostics with DTC description
• At-a-glance TPMS status screen
• Activate all known TPMS sensors
• Program AUTEL MX-Sensor to replace TPMS 99% of sensors on vehicles today
• Comprehensive OBDII Relearn coverage
• Displays vehicle-specific Relearn instructions
• One-stop multitasking designed for ideal management of workshop operations to keep all data files, customer info, and vehicle records well organized
• Cloud-based Report Management allows you to view, save, print, and share reports on mobile phones, tablets, and computer browsers
• Compatible with Videoscope and MaxiBAS BT506 to perform Battery Tests and Analysis
Autel DS808S-TS: All Enhanced Hardware, 5X Faster than MS906TS/ MS906BT/ MP808TS
Autel MaxiDAS DS808S-TS: Comprehensive TPMS Solution Provider, Works Effectively Same as MS906TS/ MS906 PRO-TS/ MK906 PRO-TS
Autel DS808S-TS: All Enhanced Hardware, 5X Faster than MS906TS/ MS906BT/ MP808TS
Autel MaxiDAS DS808S-TS: Comprehensive TPMS Solution Provider, Works Effectively Same as MS906TS/ MS906 PRO-TS/ MK906 PRO-TS
Autel DS808S-TS OE-Level Full Systems Diagnosis
The full system diagnostics give you a key to access every on-board system to root out those invisible problems such as PCM, ECM, EPS, PDM, BCM, TPM, SCCM, RADIO, etc. The Autel DS808S-TS can read and clear codes on all systems and subsystems so as to present you a clear picture of multiple sensors in different formats. And also it empowers you to read ECU information, live data and conduct active test.
Read DTCs – It can access to the depth of every onboard systems to read and analysis the DTCs
Clear DTCs – After tune-up or changing certain components, it can clear the DTCs hidden in the ECU and kill the lights on the dashboard.
ECU Information – get the retrieved ECU information in detail.
Live Data Stream – a valuable reference to determine the specific problems accurately.
Same ECU Coding Functions as Autel MaxiSys MS906BT/ MS906 PRO/ MS906 PRO-TS/ MaxiCOM MK906 PRO/ MK906 PRO-TS/ MK908/ MK908 II
Autel DS808S-TS with 30+ Maintenance Service
A well-bred horse deserves a good saddle. A real comprehensive OBD diagnostic scanner requires all-in-one functions.DS808S-TS diagnostic tool has been upgraded with over 31 service functions, such as Oil Reset, EPB, BMS, SRS, ABS Bleed, SAS Calibration, DPF Generation, Injector Coding, Throttle Matching, Suspension Matching, TPMS, etc. Moreover, DS808S-TS can be constantly upgraded with more functions to meet your various maintenance needs.
Oil Reset - Reset the oil life system and turn off the oil light after oil or oil filter replacements.
EPB - Reset the brake pad after replacing the brake pad, the servo motor, etc., deactivate/activate the brake control system, assist with brake fluid control, open and close brake pads, etc.
BMS - Reset the monitoring unit of the car battery after replacing battery or battery monitoring sensors.、Brake/ABS Bleed: bleed the brake system when the ABS system contains air to restore its braking sensitivity.
DPF - Regeneration: clear particulate matter from the DPF filter through continuous combustion oxidation mode to stabilize the filter performance.
Injector Coding - Write the actual code of the fuel injection nozzle or rewrite the code in the ECU to the code corresponding to the fuel nozzle of each cylinder after replacing the ECU and the fuel injector, to accurately control or correct the fuel injection amount of each cylinder.
SAS Calibration - Calibrate the steering angle after replacing steering related parts.
Suspension Level Calibration - Adjust the vehicle height sensor for level calibration when replacing the vehicle height sensor or control module in the air suspension system.
Throttle Adaption - Initialize the throttle actuators so that the “learned” values stored on ECU are returned to the default state.
Sunroof Initialization - Initialize the sunroof data to set the sunroof lock off, close in rain, memory function of sliding/tilting sunroof, outside temperature threshold, etc.
Seats Calibration - Specially designed for the seats with memory functions. Match the seat after repairing or replacing the seat.
And more...
Note: The reset service feature is not available on all models.
Autel DS808S-TS: More Extended Functions for Better Performance
Provide access to FCA cars with Autoauth, including Chrysler, Dodge, Jeep, Fiat etc made in and after 2018.
Compatible with Autel BT506 for battery & cranking test and MV108 for visual inspection.
Added with HDMI interface for easy demonstration on a larger screen.
Product Comparison:
Product Specifications:
Package Includes:
| MaxiDAS DS808S | MaxiDAS DS808S-BT | MaxiDAS DS808S-TS | |
| Read Codes | √ | √ | √ |
| Erase Codes | √ | √ | √ |
| Live Data | √ | √ | √ |
| ECU Information | √ | √ | √ |
| Active Test | √ | √ | √ |
| Service Functions | √ | √ | √ |
| Complete OBD Diagnositcs | √ | √ | √ |
| Oil Serive Reset | √ | √ | √ |
| Parking Brake Pad Relearn After Replacement | √ | √ | √ |
| Steering Angle Sensor Relearn | √ | √ | √ |
| Battery Registration and Reset | √ | √ | √ |
| Diesel Particulate Filter Regeneration | √ | √ | √ |
| Tire Pressure Monitoring System | Basic | Basic | Complete |
| Immobilizer Function | Basic | Basic | Basic |
| Advanced TPMS Diagnostics for Complete TPMS Health Check | -- | -- | √ |
| Activate 98% of All Known TPMS Sensors | -- | -- | √ |
| Program AUTEL MX-Sensors | -- | -- | √ |
| Comprehensive OBD relearn coverage | -- | -- | √ |
| On-screen Relearn Procedure | -- | -- | √ |
| Battery Analysis | -- | √ | √ |
| Videoscope | √ | √ | √ |
| Processor | Quad-core 1.8GHz | Quad-core 1.8GHz | Quad-core 1.8GHz |
| Operating System | Android 11 | Android 11 | Android 11 |
| Memory | 4G + 64G | 4G + 64G | 4G + 64G |
| Display | 7" LCD | 7" LCD | 7" LCD |
| Battery | 5000 mAh | 5000 mAh | 5000 mAh |
| Internet Updatable | WiFi | WiFi | WiFi |
| Multilingual Support | √ | √ | √ |
| Historical Test Records | √ | √ | √ |
| Save and Playback Data | √ | √ | √ |
| Print Data via Windows PC | √ | √ | √ |
| Vehicle communication method | Wired | Wireless (bluetooth) | Wireless (bluetooth) |
Product Specifications:
| Operating System | Android 11 |
| Processor | Cortex-A55 quad-core processor (1.8GHz) |
| Memory | 4GB RAM & 64GB On-board Memory |
| Display | 7-inch LCD capacitive touchscreen with 1024x600 resolution |
| Connectivity | Wi-Fi（802.11a/b/g/n/ac） |
| USB 2.0，Mini USB 2.0 | |
| Wireless BT V2.1+EDR | |
| HDMI Type A | |
| SD Card (Support up to 64GB) | |
| Sensors | Light sensor for brightness auto adjust |
| Audio Input/Output | Input: N/A |
| Output: Beep | |
| Power and Battery | 3.7 V/5000mAh lithium-polymer battery |
| Charges via 5 VDC power supply | |
| Input Voltage | 5 V/1.5 A |
| Operating Temp | 0 to 50°C (32 to 122°F) |
| Storage Temp | -20 to 60°C (-4 to 140°F) |
| Dimensions(WXHX D) | 270.8 mm (10.0”) x 176.0 mm(6.9”) x 36.0 mm (1.4”) |
| Weight | 885g (2.31 lb.) |
| Protocols | ISO9141-2, ISO14230-2, ISO15765, K/L-Line, Flashing Code, SAE-J1850 VPW, SAE-J1850PWM, ISo11898(Highspeed, Middlespeed, Lowspeed and Singlewire CAN, fault-tolerant CAN) SAE J2610, GM UART UART Echo Byte Protocol, Honda Diag-H Protocol,TP2.0,TP1.6 |
Package Includes:
1pc x main unit
1pc x power adapter
1pc x VCI mini
1pc x quick reference guide
1pc x packing list
2pcs x mini USB cable
1pc x soft cloth
1pc x strap
1pc x carrying case