M35080V6 EEPROM Eraser/Programmer
M35080V6 EEPROM ERASER/PROGRAMMER is used to read, program, erase Incremental registers\EEPROM. It is easy to use windows XP/2000/98 software.
UKOBD2 Provide top quality M35080V6 EEPROM Eraser/Programmer, if you need M35080V6 EEPROM Eraser/Programmer, or have any questions about M35080V6 EEPROM Eraser/Programmer, welcome to contact us.
Wholesale Top quality VAS6154, GM Tech2, VCM II For Ford, Porsche Piwis III, USB Link 2, Scania VCI3, CAN Clip, wiTech MicroPod 2, T300 key programmer, locksmith tools
images of M35080V6 EEPROM Eraser/Programmer
Functions:
1. Read, Program, Erase Incremental Registers\EEPROM
2. Erase time to Delivery State for M35080V6 1-10 minutes
3. Supported all clock rates 2.5, 5.0 and 6 MHz IC's
4. Erase time to Delivery State* 1-3 seconds
5. In-circuit/On-board EEPROM programming
6. On-board EEPROM programming for M35080V6
7. Onboard processor ATmega16 allow to Firmware Update to new versions
8. Self-Check capabilities
9. 4 adaptors for SO8 device
Additional items you'll need to use this tool:
1.Host: A 32 Bit x86 based or Pentium PC with a free Com1-8 communication port.
2.Power supply: An 12 Volt / 500 mA
Notice:
Delivery State: The first 32 bytes (incremental registers) are set to all "0"s, 16 words at 0000 The EEPROM memory array 0020-3FFF set to all FF. The Status register set to 10
Package including:
1pc x M35080V6 EEPROM ERASER/PROGRAMMER
2pcs x Adapter
1pc x COM Cable
1pc x CD
Go to Buy: M35080V6 EEPROM Eraser/Programmer