Menu

CAT200 12V 3A 3 In 1 Car Battery Tester Battery Charger Fully Automatic Power off Professional Battery Detector

Going on a long holiday?Connect your charger to make sure your battery is kept in trim while you're awa, wholesale CAT200 12V 3A 3 In 1 Car Battery Tester.

UKOBD2 Provide top quality CAT200 12V 3A 3 In 1 Car Battery Tester Battery Charger Fully Automatic Power off Professional Battery Detector, if you need CAT200 12V 3A 3 In 1 Car Battery Tester Battery Charger Fully Automatic Power off Professional Battery Detector, or have any questions about CAT200 12V 3A 3 In 1 Car Battery Tester Battery Charger Fully Automatic Power off Professional Battery Detector, welcome to contact us.

Wholesale Top quality VAS6154, GM Tech2, VCM II For Ford, Porsche Piwis III, USB Link 2, Scania VCI3, CAN Clip, wiTech MicroPod 2, T300 key programmer, locksmith tools

images of CAT200 12V 3A 3 In 1 Car Battery Tester Battery Charger Fully Automatic Power off Professional Battery Detector

CAT200 Full Automatic Car Battery Charger With LCD Screen intelligent Smart 12V/3A 2-120AH Battery Charger and Tester

If you drive rarely or make many short trips,you should charge your battery once a month.

Going on a long holiday?Connect your charger to make sure your battery is kept in trim while you're away.

Cat-200 is a device that combine battery tester and battery charger,that means it's very convenient to test and charge battery by using only one device rather than buy two devices.

Complete youtube evaluation video by Russian experts:
https://www.youtube.com/watch?v=6gkxs7GS2lU&list=RDCMUCbytwbdnuUHOeLMzfXBrrNw&index=1


Technical Parameter:

Input Voltage(AC):100-240 VAC 50/60 Hz

Output :14.4/14.7V,3.0A Max

Battery Types:Wet Cell(Flooded),Gel Cell,AGM,Lithium,EFB,or any Maintenance-Free Battery

Battery Capacity Range:2-120Ah Mantains all battery sizes

Battery Voltages:12V Lead-Acid and Lithium-Ion Batteries

Charging Type:Smart 8 Steps Trickle Charge

Testing Scope:CCA 40-2000

LCD Sizs:50*30mm

Ambient Temperature:-20℃ to 50℃

Dimensions:135*85*50 mm(L*W*H)

Actual Weight:450g

Tips:If your battery is lower 7v.Our charger can't be uesd.

Questions & Answers:

Q: Does this battery tester have power?

A: No, it can only be powered by the tested battery.
Q: Can it Charge the Battery?

A: Yes,it can charge 12V Lead-Acid and Lithium-Ion Batteries.
Q: Can it test the battery life?

A: Yes,it can test the State of Health,the State of Charge,the Internal Resistance and the Testing Conclusion .
Q: What is the charging current and how long will it take to fully charge?

A: The maximum charging current can reach 3.6A, and the charging time depends on the battery capacity
Q: Why is the result of the test inaccurate?

A: Maybe the parameter you set is wrong. Please input the correct data from the battery label.
Q: Why nothing is displayed?

A: Please make sure your battery voltage is higher than 8V and The positive and negative clamp are connected correctly.

Q:What is CCA?
A:CCA: Cranking Amps Standard, effective starting current value at 0'C

Features:

【3-IN-1 Battery Tester & Charger】This is a device that combines a car battery tester and a charger. Maximum charging current of 14.7V 3A, suitable for all lead-acid batteries of 12V 2-120Ah.

【Accurate Battery Tester】
It can test the health of the battery and the current power. Using smart chip, the difference of multiple measurements is less than 10CCA

【Battery Health Test】It adopts currently the world's most advanced conductance measurement technology to measure the actual cold cranking amps(CCA) ,capability of the battery,the State of Health(SOC),the State of Charge(SOH),the Internal Resistance and the Testing Conclusion (Good, Weak,Replace)
【Starter& Alternator Test】CAT-200 not only a great battery load tester that tests batteries cranking & charging system but also can test alternator's charging and starter's cranking conditions.
【Automatic Battery Charger】Relying on the advanced charging system, the charger can automatically adjust the voltage and current according to the charging progress during charging,which can better maintain your battery and increase its service life.Charging for a long time (more than 8 hours) will not cause the battery or charger to become hot. When the battery is fully charged, the charger will automatically stop charging and will not damage the battery due to overcharging.
【Safty and Protection】It will automatically disconnect the charging after the charging is completed,which means it won't damage the device or affect the car and your battery.Also deigned with polarity reverse connection protection to ensure safety.
【Support Multi-language】It provides 10 languages versions for different need ,including: English, Russian, Korean Japanese.French, Spanish, Italian, German,Polish and Portuguese.
【LCD visual real-time display system】The CAT-200 displays real-time battery health and smart battery charging. You can see the estimated time it will take to fully charge the battery and the current charged through the LCD screen

【How to use】


【Estimated charging time for different capacity batteries】

【Parameter】

Go to Buy: CAT200 12V 3A 3 In 1 Car Battery Tester Battery Charger Fully Automatic Power off Professional Battery Detector

Tags: CAT200 Car Battery Tester Battery Charger
Prev: WT3010 AC Voltage Detector Double Range Intelligent Measuring Pencil High & Low Sensitivity Switch Non-Contact Electric Pen
Next: DUOYI Digital Display Socket Tester DY207 Power Socket RCD Test EU/US/UK Wall Sockets Breaker Finder Analysis Safety Detector